Melamine Tableware Machine

In most melamine factories the charge weight is still decided by hand. Someone scoops compound onto a scale, tips it into a cup and carries it to the press - dozens of times a shift, at whatever speed the line happens to be running. The charge then drifts: a little heavy on a busy morning, a little light when the operator is tired, and different again when the shift changes.

Polishing is the last step between your press line and the customer's hands, and it is the one the buyer actually touches. When the finish varies from batch to batch, or when the finishing room depends on hand work to reach the gloss an export order expects, the constraint is not your moulds and it is not your compound. It is how the parts are polished.

If you are running food-grade tableware and you still load cold compound straight from the bag into the mould, you are paying for it in three places: cycle time, scrap rate and surface quality. The symptoms are familiar — bubbles and pinholes on thick sections, flow marks and weld lines that only appear on deep bowls, warped rims on large plates, and a cure time that never quite comes down no matter how long you hold the press closed

The PANLONG 550-ton melamine tableware machine is the largest press in the tableware range. Above this tonnage the machine class changes - 600T and up are built for sinks and large-format parts - so 550T is the ceiling for a factory that intends to stay a tableware producer and wants the maximum capacity the range offers

The PANLONG 450-ton melamine tableware machine is the heavy end of the tableware press range - the single machine for factories whose daily output target is built around volume, large products and multi-cavity moulds. It sits at the top of the 250T-550T tableware line, below the 600T and above sink and toilet seat family

The PANLONG 400-ton melamine tableware molding machine is a single color press built for the heavier end of tableware production - large dinner plates, deep serving bowls, platters and multi-cavity runs that need more clamping force than a 250T or 350T line can give. It runs on the same moulds, compound and finishing line as the rest of the 250T-550T family.

The PANLONG 300-ton melamine tableware molding machine is a single color press that sits in the middle of the 250T to 550T tableware line - the tonnage step between the 250T and the 350T for factories whose product mix is growing beyond a 250T line. It moulds plates, bowls, cups, trays and dinnerware components with the same moulds, compound and process your line already runs

The PANLONG 1000-ton melamine sink molding machine is the large-tonnage step of the sink press range, which runs from 600T up to 1200T. It is built for factories whose sink orders have grown past what a mainstream press can answer - bigger sink bodies, more cavities per cycle, longer continuous runs. With a 1000-ton clamping force it holds the deep-draw moulding power sink products need while keeping cycle times steady across shifts

The 600T Automatic Melamine Moulding Machine is the high-performance core equipment designed specifically for large-scale melamine tableware production. With a 600-ton clamping force, it provides exceptional stability and precision for manufacturing plates, bowls, trays,sink and other crockery. Features include an advanced PLC control system, dual-stage pressure management, and a user-friendly touch interface, ensuring a high automation level, extreme energy efficiency, and low maintenance costs.