- Decal Paper
- Melamine Tableware
-
Melamine Tableware Machine
- 1200ton melamine machine
- 1000ton melamine machine
- 800ton melamine machine
- 600ton melamine machine
- 550ton melamine machine
- 500ton melamine machine
- 450ton melamine machine
- 400ton melamine machine
- 350ton double colour melamine machine
- 350ton melamine machine
- 300ton melamine machine
- 250ton double colour melamine machine
- 250ton melamine machine
- Melamine Tableware Mould
- Melamine Powder
600 Ton Melamine Sink Molding Machine | Sink Press – PANLONG
Technical Specifications
Sink production is a separate business from tableware - different moulds, different products, different buyers. The 600T suits factories at the start of that journey:
(1)Tableware factories adding a sink line alongside their existing presses
(2)Buyers entering the kitchenware market who want one sink-capable machine before committing to a larger range
(3)Factories with workshop or foundation limits that rule out an 800T or larger press
(4)Producers focused on compact sink designs and single-bowl kitchen sinks
What the 600T Moulds
With sink moulds matched to the platen, the 600T moulds melamine kitchen sinks and wash basins with the deep-draw forming those parts need. The same press family is used for toilet seats - the mould is what changes between products, not the machine. Sink moulds are supplied to your product drawings and confirmed against the platen before order
The Sink Range: 600T to 1200T
PANLONG builds the sink press range in four steps, so your investment grows with your orders
（1）600T - entry sink press: compact sinks, single-bowl designs, starting a sink line
（2）800T - mainstream sink press: standard kitchen sinks and wash basins with more mould area
（3）1000T - large sink press: bigger sink bodies and higher cavity capacity
（4）1200T - large-format press: the largest sinks and toilet seat products
| Description of 600 ton high quality machine | |||
| Picture | Category | Project | PL 600T |
 |
Technical parameter |
cylinder diameter | 600 mm |
| Total pressure | 600T | ||
| Plate size | 1000*900mm | ||
| trip | 400mm | ||
| Guide post diameter | 150mm | ||
| Machine weight | 11500kg | ||
| Machine size | 2450×1650×2750 mm | ||
| Machine configuration |
Heat shield | Mica plate | |
| eating plate thicknes | 90mm | ||
| Heating mode | Heating rod | ||
| electric machinery | Jiejia 15kw | ||
| Oil pump | Vickers VQ21 | ||
| Solenoid valve | Taiwan Oil Research Institute | ||
| Full oil valve | Taiwan oil power | ||
| PLC | Delta | ||
| servo controller |
Optional |
||
Built for Continuous Sink Production
（1）PLC-controlled dual-stage pressure: fast closing, then precise holding pressure for uniform wall thickness
（2）Deep-draw capable frame and platen sized for sink moulds
（3）Stable hydraulic system for repeatable cycle times across shifts
（4）Single color and double color configurations - the same sink moulds work on both, the double color version adds pressure positions
From Order to Operating Line
PANLONG handles the full sequence: machine configuration matched to your sink drawings, sink mould supply, layout planning for your workshop, installation, commissioning and operator training. One team owns the handover, so the line starts production on your own sink products rather than on test pieces
FAQ
Q1: What size of kitchen sink can the 600T mould?
Compact and single-bowl sink designs that fit within the platen area. Send us your product drawings and we will confirm the mould fit and cavity count before you order.
Q2: Is the 600T the right first press for starting a sink line?
Yes - it is the entry tonnage of the PANLONG sink range. If your plan targets standard kitchen sinks from the start, the 800T is the mainstream choice; our engineers size the line from your target products either way
Q3: How does the 600T compare with the 800T for sink production?
We provide remote technical support, video operation tutorials, and on-site engineer installation for international clients
Q4: Can the same 600T press also mould toilet seats?
Yes. The sink and toilet seat machines are the same press family - the mould is what changes between products. Toilet seat moulds can be supplied to your drawings
Q5: I already run a tableware line - can I add a 600T for sinks?
Yes, that is the most common path into sink production. The 600T joins your existing presses, and PANLONG supplies the sink moulds, layout plan and training for the new product line