1000 Ton Melamine Sink Molding Machine | Large Sink Press – PANLONG

The PANLONG 1000-ton melamine sink molding machine is the large-tonnage step of the sink press range, which runs from 600T up to 1200T. It is built for factories whose sink orders have grown past what a mainstream press can answer - bigger sink bodies, more cavities per cycle, longer continuous runs. With a 1000-ton clamping force it holds the deep-draw moulding power sink products need while keeping cycle times steady across shifts

product details

Product Detail

When Orders Outgrow the 800T:

The 800T is the mainstream workhorse of sink production. As a sink line matures, three signals say it is time to add a 1000T:

（1）Larger sink bodies - kitchen sink designs that need more platen area than the 800T line can hold comfortably

（2）More cavities per cycle - volume orders where multi-cavity moulding decides whether the order is profitable
（3）Back-to-back schedules - continuous production where a single large press replaces several smaller cycles

What a 1000T Line Handles：
The 1000T is configured around your sink drawings, not the other way round. Typical line roles
（1）Large melamine kitchen sinks and wash basins
（2）Multi-cavity sink moulds for volume orders
（3）Large catering trays and institutional pieces when fitted with matching moulds
（4）Toilet seats and lids - the sink press family moulds them with the same machine, changing only the mould

Where the 1000T Sits in the Sink Range：
PANLONG builds the sink range in four steps so capacity grows with your orders:
（1）600T - entry sink press: compact sinks, starting a sink line
（2）800T - mainstream sink press: standard kitchen sinks
（3）1000T - large sink press: bigger bodies, more cavities, volume schedules
（4）1200T - large-format press: the largest sinks and toilet seat products

Built for Volume Production
（1）PLC-controlled dual-stage pressure: fast closing, then precise holding pressure for uniform wall thickness
（2）Deep-draw capable frame and large platen sized for big sink moulds
（3）Stable hydraulic system keeps repeatable cycle times through long shifts
（4）Single color and double color configurations - the same sink moulds work on both, the double color version adds pressure positions

Product Usage

Description of 1000 ton high quality machine
Picture	Category	Project	PL 1000T
	Technical parameter	cylinder diameter	830 mm
		Total pressure	1000T
		Plate size	1100*1600mm
		trip	700mm
		Guide post diameter	150mm
		Machine weight	25tons
		Machine size	3.6x1.8x4.2m

	Machine configuration	Heat shield	Mica plate
		eating plate thicknes	90mm
		Heating mode	Heating rod
		electric machinery	Jiejia 30kw
		Oil pump	Vickers VQ21
		Solenoid valve	Taiwan Oil Research Institute
		Full oil valve	Taiwan oil power
		PLC	Delta
		servo controller	Optional

From Order to Operating Line
PANLONG handles machine configuration matched to your sink drawings, sink mould supply, workshop layout planning, installation, commissioning and operator training. One team owns the handover from order to first production batch

FAQ

Q1: How many sink cavities can a 1000T press run?
Cavity count depends on the sink size and mould area. Send us your product drawings and we will confirm the cavity configuration and cycle estimate before you order

Q2:When should a factory choose the 1000T over the 800T?
When sink bodies are larger than the 800T platen handles comfortably, when volume orders reward multi-cavity moulding, or when you want headroom for the next product size. Our engineers size the line from your target products either way

Q3: How large a sink mould can the 1000T accept?
The platen is sized for large sink moulds. Send your mould drawings or product dimensions and we will confirm the fit and recommend the configuration

Q4: What else can the 1000T mould besides sinks?
With matching moulds the same machine produces large catering trays, institutional tableware, and toilet seats and lids - the sink press family changes products by changing the mould, not the machine

Q5: How does the 1000T fit with an existing 800T line?
It joins the line as the large-tonnage partner: the 800T keeps standard sink schedules, the 1000T takes the large bodies and volume orders. PANLONG provides the layout plan so both run in the same workshop